Alto-Shaam Vector VMC-F3E, Руководство по обслуживанию

Страница: 55 / 116

T
ROUBLESHOOTING
Vector® F Series
▪
Service Manual
▪
MN-46896
▪
Rev 01
▪
07/20
55
The Oven does not Heat
Before you start
▪
Read and follow the steps described in the topic The Chambers do not Heat—
Element Control Voltage.
▪
At the main disconnect switch, determine which phase connects directly to the
heating element, and which phase connects to the L1 terminal of the SSR.
▪
Remove the service panel.
Step Action
1. Navigate to the service screen.
2. Enter the pass code 6702.
3. Touch the check mark.
4. Scroll to the chamber to be tested.
5. Expand the selection list.
6. Read the temperature sensor value.
7. Select the arrow to the right of the target temperature.
Continued on next page
WARNING:
Electric shock and arc flash hazard.
Use caution when measuring line voltage.
Wear Personal Protective Equipment (PPE).

NOTE: The chamber blower fans must operate if the blower fans do
not operate. See topic Chamber Blower Fans do not Operate .
NOTICE
Do not operate the oven in a cooking mode for an extended
period of time with the top panel removed. Damage to the
electronics may occur without adequate cooling airflow.
An auxiliary fan must be used if the oven will be operated in a
cooking mode for an extended period of time with the top
panel removed.

NOTE:
The button to the right of the chamber number
will expand and collapse the selection list. When the
button is gray, the button is active. When the button is
white, the button is inactive.