Alto-Shaam Vector VMC-F3E, Руководство по обслуживанию

Страница: 51 / 116

M
AINTENANCE
Vector® F Series
▪
Service Manual
▪
MN-46896
▪
Rev 01
▪
07/20
51
Continued from previous page
5. Spray the interior surfaces of the oven with Alto-Shaam non-caustic oven
cleaner, CE-46828. Let the cleaner work for 3–5 minutes. Scrub with a non-
abrasive scrub pad. Remove any residue with a water-soaked towel.
6. Remove the cooling fan filters f . Clean with a mild cleaner and rinse with
hot water.
7. Re-install the cooling fan filters.
8. Clean the door glass with Windex® or equivalent glass cleaner.
9. Re-install the jet plates and cooking racks.
10. Spray the exterior of the oven with stainless steel polish. Wipe the exterior of
the oven with a non-abrasive scrub pad.
Result The oven is now clean.

NOTE:
Replace the cooling fan filters at least once a year.

NOTE:
Make sure the jet plates are installed correctly.
The nozzles on the jet plates should be pointing towards
the food.
NOTICE
Use only non-caustic cleaners.
Do not spray directly into the fan openings on the
rear of the oven.
Do not use cleaners that contain sodium hydroxide
(lye) or phosphorus.
VMC-TS-009516
f