Alto-Shaam Vector VMC-F3E, Руководство по обслуживанию

Страница: 47 / 116

M
AINTENANCE
Vector® F Series
▪
Service Manual
▪
MN-46896
▪
Rev 01
▪
07/20
47
M
A
IN
T
E
N
A
N
C
E
Maintenance Schedule
Requirements
▪
S ee topic How to Clean the Oven .
▪
Make sure the oven is cooled down and off—inside of chamber 140°F (60°C) or
less.
Daily
For daily maintenance, do the following.
▪
Remove
any spills with disposable paper wipes or a damp cloth.
▪
Wipe the outside of the oven with a damp cloth.
▪
Check the screen for cracking or peeling. Contact Technical Service if needed.
Weekly For weekly maintenance, do the following.
▪
Clean the entire oven. Make sure to use a non-abrasive nylon scrub pad.
▪
Inspect and clean the grease filters (if equipped)
▪ Do not spray the cleaner directly into the fan openings located in the rear of the
oven.
Monthly For monthly maintenance, do the following.
▪ Inspect and clean the cooling fan filters.
Yearly For yearly maintenance, do the following.
▪ Remove the convection element(s) and inspect the return air path for grease
buildup. Remove any grease buildup.
▪
Inspect the catalyst for any signs of degradation (Vector H Series models only).
▪
Inspect the heater flange area for grease leakage.
▪ Inspect the motor flange area for grease leakage.
▪
Inspect the door gaskets for correct shape and seal.
▪
Inspect the inner and outer door window panes for cracking or chipping.
▪
Check and tighten all wire connections.
▪
Check and tighten all display, interface and control board connections.
▪ Check and tighten the door hinges.
Continued on next page

NOTE:
Must be performed by a qualified professional.