Alto-Shaam CT Express Скачать руководство пользователя страница 49

   

MN-29805  •  Rev 10  •  06/17  •  Combitherm CT Express Installation Manual 

47

Limited Warranty

Alto-Shaam, Inc. warrants to the original purchaser that any original part that is found to be defective in Alto-Shaam, 

Inc. warrants to the original purchaser that any original part that is found to be defective in material or workmanship 

will, at Alto-Shaam’s option, subject to provisions hereinaft er stated, be replaced with a new or rebuilt part.
The labor warranty remains in effect one (1) year from installation or fi ft een (15) months from the shipping date, 

whichever occurs fi rst. Alto-Shaam will bear normal labor charges performed by an authorized Alto-Shaam service 

agent during standard business hours, excluding overtime, holiday rates or any additional fees. 
The parts warranty remains in effect for one (1) year from installation or fi ft een (15) months from the shipping date, 

whichever occurs fi rst. An optional extended warranty is available but must be purchased with the original equipment 

order. Please consult the factory for net pricing options and details.

This warranty does not apply to:

1.   Replacement of wear parts, including light bulbs, door gaskets, and/or the replacement of glass due to damage of 

any kind.

2.  Equipment damage caused by accident, shipping and handling, improper installation or alteration of any kind.
3.   Equipment chassis or component/system damage as a result of inadequate routine maintenance and cleaning.  

Required maintenance and cleaning of steam generating equipment is the responsibility of the owner/operator.

4.   Equipment used under conditions of abuse, neglect, misuse, carelessness or abnormal conditions including, but 

not limited to, equipment subjected to non-approved or inappropriate chemicals including, but not limited to, 

compounds containing chlorine, chlorides or quaternary salts, or equipment with missing or altered serial numbers. 

Damage caused by use of any cleaning agent other than Alto-Shaam’s Combitherm® Oven Cleaner including, but not 

limited to, damage due to chlorine, bleach, quaternary salts, souring powders or other harmful chemicals. Use of 

Alto-Shaam’s Combitherm® Cleaner on Combitherm appliances is highly recommended.

5.   It is the sole responsibility of the owner/operator/purchaser of this equipment to verify that the incoming water 

supply is comprehensively tested and if required, a means of “water treatment” provided that would meet 

compliance requirements with the published water quality standards published at right. Non-compliance with these 

minimum standards will potentially damage this equipment and/or components and VOID the original equipment 

manufacturer’s warranty. Alto-Shaam recommends using OptiPure® products to properly treat your water. 

6.   Any losses or damage resulting from 

malfunction, including loss of product or 

consequential or incidental damages of 

any kind.

7.   Equipment damage resulting from 

modifi cation in any manner from original 

model, substitution of parts other than 

factory authorized parts, removal of any parts 

including legs, or addition of any parts.

This warranty is exclusive and is in lieu of all other warranties, expressed or implied, including the implied 

warranties of merchantability and fi tness for a particular purpose. In no event shall Alto-Shaam be liable for loss of 

use, loss of revenue or profi t, or loss of product, or for any indirect, incidental or consequential damages.
No person except an offi cer of Alto-Shaam, Inc. is authorized to modify this warranty or to incur on behalf of 

Alto-Shaam any other obligation or liability in connection with Alto-Shaam equipment. 

Warranty effective January 1, 2014

COMBITHERM WATER QUALITY MINIMUM STANDARDS

CONTAMINANT

INLET WATER REQUIREMENTS

Free Chlorine

Less than 0.1 ppm (mg\L)

Hardness

30-70 ppm

Chloride

Less than 30 ppm (mg\L)

pH

7.0 to 8.5

Silica

Less than 12 ppm (mg\L)

Total Dissolved Solids (tds)

50-125 ppm

W164 N9221 Water Street  •  P.O. Box 450  •  Menomonee Falls, Wisconsin 53052-0450 l U.S.A.

 

PHONE:  262.251.3800  • 800.558-8744 USA/Canada   

 

FAX:  262.251.7067 • 800.329.8744 U.S.A. ONLY 

 

 www.alto-shaam.com

Содержание CT Express


















































Отзывы: