Altair Constellation Audio, Руководство пользователя

Страница: 8 / 20

Altair owner’s manual
8
When connecting to an amplifier, be sure to match the output to the correct channel on your amp. As you are
looking at the back of the Altair, the outputs on the left side are for the right channel, the outputs on the right
are for the left channel.
To remove an RCA plug, grasp it by the connector body and pull the plug out.
Other connections on the Altair
5. Power inputs
These inputs connect to the power outputs of the Altair’s separate power supply. Constellation Audio has
supplied you with special spiral-wrapped, gold-plated copper cables designed for aerospace use. Each of these
cables is rated to handle 30 amps.
Each of these jacks mates with a matching jack on the power supply. Be sure to connect the Left Analog Power
jack on the preamp to the Left Analog Power jack on the power supply, the Right Analog Power jack on the
preamp to the Right Analog Power jack on the power supply, and the Control Power jack on the preamp to the
Control Power jack on the power supply.
Before connecting these cables, switch off the Altair’s power supply and disconnect it from the AC power.
Failing to do this can damage the Altair or its power supply.