Altair Constellation Audio, Руководство пользователя

Страница: 10 / 20

Altair owner’s manual
10
10. DC output
This jack outputs DC voltage to power the Pulsar RF hub.
Connect the power cable supplied with the hub to this jack.
11. AC input
This AC input accepts standard 15-amp IEC-type power
cords. You may use the high-quality power cord supplied
with the Altair, or substitute an aftermarket power cord if
you wish.
Controls / displays / indicators
Front status indicator
The front of the Altair has a multi-colored LED status
indicator that will tell you what state the preamp is in.
SOLID RED: Standby mode. Preamp is powered down but
ready to use.
FLASHING RED: Cool-down mode. Preamp is powered off
but cooling down. The power button cannot be used in this
mode. This mode lasts 1 minute.
FLASHING GREEN: Warm-up mode. Preamp power is on but
preamp is warming up and cannot be used. This mode lasts
1 minute.
SOLID BLUE: On mode. Preamp power is on and the
preamplifier is fully functional.
FLASHING BLUE: Mute mode. Preamp is powered but will
produce no sound.