Altair Constellation Audio, Руководство пользователя

Страница: 14 / 20

Altair owner’s manual
14
4. Powering up the system from the Pyxis
When the system is turned off, touch the Pyxis screen to
bring up the Home screen. This screen will show onscreen
buttons with the names of the Constellation Audio
components that are connected to the Pulsar RF Hub. If you
are not using Hercules amplifiers, the Hercules button will
appear in light gray instead of red.
Touch the Altair onscreen button. This will take you to the
Altair input selection screen. Hit the Standby hard button
under the red power status indicator. The indicator will turn
green and the green LED on the front of the Altair will begin
flashing to indicate the unit is in its 1-minute warm-up
mode.
Now hit the Home hard button on the far left.
If you are
using Hercules power amplifiers, touch the Hercules button
to take you to the Hercules power screen. If you are not
using Hercules amplifiers, wait until the Altair has
completed its power cycle before turning your amps on.
To power-up the Hercules amplifiers, tap each of the
onscreen Power buttons.