Altair Constellation Audio, Руководство пользователя

Страница: 11 / 20

Altair owner’s manual
11
Front panel buttons
Underneath the front panel are six buttons that allow you to control the Altair without the Pyxis remote. From
left to right they are:
12. Standby
Pressing the Standby button while the unit is off will awaken the Altair. The LED will flash green for 1 minute
while the unit warms up. While warming up the Altair will not respond to other commands. Once the Altair is
ready for use, the LED will flash blue indicating Mute mode. Pressing the Standby button again will place the
Altair into a powered-down standby mode. The LED status indicator will flash red while powering down, then
turn a solid red when fully powered down. The Altair is still capable of being turned on via the remote in this
state.
13. Mute
The Altair always defaults to mute mode when first powered on. Press this to start listening. The LED will stop
flashing and remain solid blue. Press again to silence the audio.
14. Source up and source down
These buttons cycle through the eight sources.
15. Volume up and volume down
Press Up for more volume, Down for less.