71
-EN
01GB06INE-W957A.fm
ALPINE INE-W957A 68-24567Z47-A (EN)
If the camera has a view switch function, the Direct Change switch is
displayed.
1
Touch the screen when the image from the rear
camera is displayed.
The operation screen is displayed on the screen.
•
After a 5-second time-out, the operation screen returns to the
camera display screen.
2
Touch
[Back]
,
[Panorama]
,
[Corner]
or
[Top]
.
The image pattern changes.
[Back]:
Rear View
[Panorama]:
Panorama View
[Corner]:
Corner View
[Top]:
Ground View
•
For detailed information about image patterns, see the camera
Owner’s Manual.
1
Touch the screen when the image from the camera is
displayed.
The operation screen is displayed on the screen.
•
After a 5-second time-out, the operation screen returns to the
camera display screen.
2
Touch
[Guide OFF]
on the Rear camera display
screen.
The guide disappears, and then the
[Guide OFF]
switch
changes to
[Guide ON]
.
3
Touch
[Guide ON]
to turn on the guide.
1
Touch the screen when the image from the camera is
displayed.
The operation screen is displayed on the screen.
•
After a 5-second time-out, the operation screen returns to the
camera display screen.
2
Touch
[Caution ]
.
•
For each touch, the caution location moves to the top or bottom of the
screen.
About the Rear Camera Guide
To display the guide, set “Guide Display ON/OFF Setting” (page 71) to
On. Also, to adjust the guide, refer to “Adjusting the Rear/Front Camera
Guide” (page 58). You can also turn off the guide in the Rear camera
display screen.
Indication mark meaning
When the car is put into reverse gear, the monitor switches to the rear
view camera image. Guides appear to help visualize the car’s width and
distance from the rear bumper.
1
Car width extension marks (red, yellow and green in
order of distance)
If properly calibrated, the marks indicate the car’s width.
This helps guide the car’s path when backing up in a
straight line.
The marks represent the distance from the rear of the car
(from the rear end of the bumper).
•
The marks do not move in synchronization with the
steering wheel.
2
Distance guidance marks
The marks represent the distance from the rear of the car
(from the rear end of the bumper).
•
The marks do not move in synchronization with the
steering wheel.
•
Each centre position of the mark represents about 0.5 m
(red), about 1 m (yellow) and about 2 m (green) behind.
•
Depending on the condition of the car or road surface, the range of
vision may vary.
•
The camera has a limited range of vision. Objects at extreme angles
to the camera (e.g. under the bumper or at opposite ends of the
bumper) may not be in the its field-of-vision.
•
The rear camera image may have a tint which is different from the
actual surroundings.
•
Depending on the car, the guidance may deviate to the right or left.
This is not a malfunction.
Switching the Image Pattern for the Rear
Camera
Guide Display ON/OFF Setting
Adjusting the Caution Display Location
01GB00INE-W957A.book Page 71 Monday, April 21, 2014 7:49 PM
