41
-EN
01GB05INE-W957A.fm
ALPINE INE-W957A 68-24567Z47-A (EN)
Setting items: Language / Remote Sensor
*
1
/ Security Code /
Top/Bottom Banner Fade Out / Screen/
LED Customize / Visual / About / Installation /
External AP / Optical
*
2
*
1
Displayed only when RSE is On (page 55).
*
2
Available only when External AP is On.
•
Depending on the item, repeat step 3.
4
Touch
[
]
or
[
]
etc., to change its setting.
•
When the pop-up window for setup is displayed, touch
[
]
to
close the window after setting.
5
Touch
[
]
to return to the previous screen.
•
Immediately after changing the settings of General Setup (While the
system is writing data automatically) do not turn the ignition key to
OFF. Otherwise, the settings may not be changed.
Language Setting
Touch
[Language]
on the General setup menu in step 3. Refer to
“General Setup Operation” (page 40).
Scroll display is available if CD text, folder name, file name or tag
information is entered.
Setting item: Auto Scroll
Setting contents: Off / On (Initial setting)
The character code to be used for tag text information displayed on the
screen can be selected from 7 character codes.
Setting item: Format Sel.
Setting contents: EU1 / EU2 (Initial setting) / RUS / CHI / THA /
ARA / HEB
The Setup menu, feedback information, etc. for this unit can be changed
to appear in the selected language.
Setting item: Language Sel.
Setting contents:
•
Touch
[OK]
to confirm the language and display the screen in the
specified language.
Remote Sensor Setting
[Remote Sensor]
is selected on the General setup menu in step 3. Refer
to “General Setup Operation” (page 40).
For remote control operation, the remote sensor of the external device
(monitor, etc.) can be switched, as you prefer.
Setting item: Remote Sensor
Setting contents: Front (Initial setting) / Rear
•
If the RSE (page 55) is “Off”, the setting is not displayed.
Security Code Setting
[Security Code]
is selected on the General setup menu in step 3. Refer
to “General Setup Operation” (page 40).
You can set the system to be unusable without entering a password.
When you turn this setting to “On” and set a password, password input
is required when the system is connected to a battery and turned on for
the first time.
Setting item: Security Code
Setting contents: Off (Initial setting) / On
Setting the password
1
Touch [
] or [
] of “Security Code” to set to “On”.
2
After the confirmation message appears, touch
[OK]
.
The password setting screen is displayed.
3
Enter a password, then touch
[OK]
.
•
Enter the 6-digit number.
•
Input numbers are displayed as “
*
”.
4
Enter the same password again, then touch
[OK]
.
The password is set and the system returns to the previous
screen.
•
If you forget a registered password, you cannot use this unit. In this
case, service will be required.
Clearing the password
1
Touch
[
]
or
[
]
of “Security Code” to set to “Off”.
The password setting screen is displayed.
2
Enter the password you have set, then touch
[OK]
.
The password is cleared and the system returns to the
previous screen.
•
Input numbers are displayed as “
*
”.
Setting the Scroll
Off:
Turns off the scroll mode.
On:
Turns on the Auto scroll mode. Scroll display is repeated
as long as the mode is turned on.
Format settings
EU1:
ISO 8859-1
EU2:
ISO 8859-15
RUS:
ISO 8859-5
CHI:
GB18030
THA:
CP874
ARA:
CP1256
HEB:
CP1255
Setting the Menu Language
Front:
The remote sensor of this unit is effective.
Rear:
The remote sensor of the external monitor
connected to AUX OUTPUT of this unit
becomes effective. The remote control
operates the source connected to the AUX
OUTPUT terminals.
Setting Security code
01GB00INE-W957A.book Page 41 Monday, April 21, 2014 7:49 PM
