101
-EN
01GB07INE-W957A.fm
ALPINE INE-W957A 68-24567Z47-A (EN)
Connection Diagram of SPST Switch (sold separately)
(If the ACC power supply is not available)
•
If your vehicle has no ACC power supply, add an SPST (Single-Pole, Single-Throw) switch (sold separately) and fuse (sold separately).
•
The diagram and the fuse amperage shown above are in the case when X008AU/X008EU/INE-W957A/INE-W957E is used individually.
•
If the switched power (ignition) lead of the X008AU/X008EU/INE-W957A/INE-W957E is connected directly to the positive (+) post of the vehicle
’
s
battery, the X008AU/X008EU/INE-W957A/INE-W957E draws some current (several hundred milliamperes) even when its switch is placed in the
OFF position, and the battery may be discharged.
X008AU/X008EU/
INE-W957A/INE-W957E
(Red)
(Yellow)
SPST SW (Optional)
FUSE (5A)
(Optional)
FUSE (20A)
(Optional)
Battery
ACC
BATTERY
To prevent external noise from entering the audio system.
•
Locate the unit and route the leads at least 10 cm away from the car harness.
•
Keep the battery power leads as far away from other leads as possible.
•
Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.
•
If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various
noise suppressors, contact them for further information.
•
Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
01GB00INE-W957A.book Page 101 Monday, April 21, 2014 7:49 PM
