Jeep Wrangler
i509-WRA-JK 20220404v1
21/22
Set Up Guide
1
Turn the vehicle’s Ignition switch to ACC.
2
Turn ON the i509-WRA-JK by pressing any key.
4
To get into the settings the parking brake sequence needs to be done.
Engage the parking brake, release
the parking brake, and engage the parking brake again.
5
Vehicle information- Set the desired gauge information. (HOME/VEHICLE INFO/SETUP).
6
If a rear camera is present, turn it ON in the system menu. (HOME/FUNCTION/CAMERA/REVERSE CAMERA).
Troubleshooting Guide
Symptom
Possible Cause
Remedy
1
iPhone not working with
HDMI.
Not using Apple HDMI to Lightning
adapter.
Purchase the HDMI to Lightning adapter
directly from Apple. Not all 3rd party
adapters work the same.
Didn’t plug USB power into a 2A
source.
Do not plug into the USB from the Alpine
head unit. A third party USB adapter will
need to be used that is 2A.
2
Android phone is not working
with HDMI.
Using incorrect HDMI adapter.
If the phone has the feature to use an HDMI
adapter it must be the one purchased from
the manufacturer of the phone, not a third
party adapter.
Miracast adapter isn’t plugged into
a 2A source.
Do not plug into the USB from the Alpine
head unit. A third party USB adapter will
need to be used that is 2A.
Miracast adapter has resolution
settings that are too high.
Plug the adapter into another monitor (for
example a television in the home) and reduce
the resolution settings.
3
iDatalink website says serial
number is invalid.
Incorrect serial number is being
used.
In the i509-WRA-JK settings confirm the
serial number. MENU/SETUP/GENERAL/
ABOUT.
Serial number may not be in
iDatalink database.
Call ADS at 1-866-427-2999 and verify.
4
No output from RCA’s
Maestro module is flashed for
amplified system.
Re-flash module for non-amplified system.
