30
Searching For Locations
Auto searching for border point
When you travel using two map CD ROMs, you can select automatically or
manually a border point on the road as a waypoint or a destination so that the
navigation system guides you to the border point. If your final destination is
located in the covering area of the other CD ROM, you can select your
destination via the border point as a waypoint. (For Manual Searching, see
page 33.)
Press the MENU button to display the
main menu. Select “Route” from the
main menu, the sub-menu appears.
1
ENTER
Select “ROUTE PREF.” from the sub-
menu and press ENTER. The “Select
route preferences” menu appears.
2
ENTER
Select “AUTO” from the "MUTI-CD"
menu and press ENTER.
Notes: • To select the Auto Searching for a border point,
the present vehicle position and destination
should be included in 2 different map areas
which are adjoining each other, and the CD
ROM including the destination area should be
loaded. Otherwise, use the manual searching.
When "MANUAL" is selected, see the Manual
searching for border point section on page 33.
• If you have only one map CD ROM or you use
the map CD ROM for Great Britain or you travel
on a direct ferry boat from the area of the
current vehicle position to an adjacent area or
vice versa, select "OFF."
3
ENTER
