Alpine DVA-7996R, Руководство пользователя

Страница: 28 / 69

26
-EN
Displaying the Regional Label
The regional name of the ensemble that you are
listening is displayed.
1
Press TITLE button for at least 3 seconds.
“REGIONAL” is displayed for 2 seconds, and then the
Regional Label is displayed for 5 seconds, and then
you return to the display that you selected with the
steps described under the section “Changing the
Display Mode” on page 25.
NOTES
•
If no Regional Label is received, “NO REGON” is displayed.
•
When you are in the Dynamic Label mode, you cannot display
the Regional Label.
Receiving Announcement Information
of DAB Local Stations
1
Press the SETUP button for at least 3 seconds.
2
Press the DN or UP button to select “DAB
REG.”
3
Press the BAND button to select ON or OFF for DAB
REG.
ON: You can automatically receive the announcement
interrupt of the regional you are currently in.
OFF: Announcement interrupt is valid for all regionals.
4
Press SETUP button to return to the normal mode.
Setting for Automatic Change from
DAB to RDS
When the DAB reception is poor, you can set this
selection ON to automatically change to the RDS station
(a station that can be received) within the same
broadcasting station until good reception is achieved.
You can switch this for voice only (except Service label/
Dynamic label display). The display and operation
remain as for DAB.
1
Press the SETUP button for at least 3 seconds.
2
Press the DN or UP button to select “R/D SW.”
3
Press the BAND button to select either ON or OFF.
4
Press the SETUP button to return to the normal mode.
NOTE
When reception is being changed from DAB to RDS, the DAB
indicator blinks.
Setting ON/OFF for DRC (Dynamic
Range Control)
If you set this ON when receiving the sound of a wide
Dynamic Range, the DRC (Dynamic Range Control)
gain increases when the source sound is small, and the
DRC (Dynamic Range Control) gain decreases when
the source sound is large, making the Dynamic Range
narrower to give you better and more comfortable sound
even in the vehicle that produces a large noise.
1
Press the SETUP button for at least 3 seconds.
2
Press the DN or UP button to select “DAB
DRC.”
3
Press the BAND button to select either ON or OFF.
4
Press the SETUP button to return to the normal mode.
NOTE
When a radio programme is set to ON, sound other than what
you previously set may be produced depending on the broadcast.
In this case, turn the programme OFF.
DAB Operation
DN UP
SETUP
BAND
TITLE