Alpine DVA-7996R, Руководство пользователя

Страница: 24 / 69

22
-EN
RDS Operation
5
Press the F button to activate the normal mode. The
“FUNC” indicator light goes out.
NOTE
Operate the unit while the “FUNC” indicator is lights up.
If no buttons are pressed within 5 seconds, the “FUNC”
indicator light goes out.
Displaying Radio Text
Text messages from a radio station can be displayed.
1
Press the TITLE button while receiving FM in the radio
mode to select the Radio Text display.
The display will change every time the button is
pressed.
The display shows “WAITING” for a few seconds, then
starts scrolling the text message.
NOTES
•
If there is no receivable text message or the unit cannot
receive a text message properly, the display shows “NO
TEXT” for 2 seconds.
•
When the BAND button is pressed and held for at least 2
seconds while the PS (Programme Service Name) or Radio
Text display is being displayed, the display shows the station
frequency for 5 seconds, then returns to the previous display.
•
* If there is no PS display, the frequency will be displayed.
Priority PTY (Programme Type)
This function allows presetting of a programme type such as
music category, news, etc. You can listen to a programme in
the preset programme type as the unit automatically gives
priority to the preset programme type when it begins
broadcasting, and interrupts the programme you are
currently listening. This feature is functional when your unit is
set to a mode other than the LW and MW.
1
Press the F button. The “FUNC” indicator lights up.
2
Press the P. PTY button to activate the PRIORITY PTY
mode.
“PRIO-PTY” is displayed for 2 seconds and then the
programme type for 3 seconds. The initial setting is
“NEWS.”
NOTE
If no buttons are pressed within 5 seconds after pressing the P.
PTY button, the PRIORITY PTY mode is automatically
cancelled.
3
Press the DN or UP button within 5 seconds
while “NEWS” is being displayed to choose a desired
programme type. Then press
P. PTY button. The
PRIORITY PTY function will activate.
4
Press the P. PTY button to activate the PRIORITY PTY
mode again.
•
To change the programme category, perform the
step 3.
•
To disable the PRIORITY PTY function, press and
hold the P. PTY button for at least 2 seconds.
NOTES
•
In the PRIORITY PTY function, unlike in the T.INFO function,
the volume does not increase during operation.
•
When priority PTY interrupts the programme, the preset No.
is displayed as “P”.
PS (Programme Service Name) mode
Radio Text display
∗
DN UP
F P. PTY
TITLE