Alpine DVA-7996R, Руководство пользователя

Страница: 20 / 69

18
-EN
Optical Digital Input Selection for an
External Audio Processor
Make sure “OPTOUT” is ON in “Setting the Digital
Output” (page 17) before switching this setting.
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the DN or UP button to select “APRC
OTHER”.
NOTE
When OPTOUT is ON, “APRC OTHER” is displayed.
3
Press the BAND button to toggle the mode between
APRC OTHER and APRC H510.
APRC OTHER: When connecting any audio processor
via the optical digital cable except the PXA-H510.
APRC H510: When connecting PXA-H510.
4
Press the SETUP button to activate the normal mode.
NOTE
Afterwards, set ACC to OFF once, then turn it ON again.
The setting of fiber digital input switch is decided.
Demonstration
This unit has a Demonstration feature which simulates the
display functions.
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the DN or UP button to select the DEMO
mode.
3
Press the BAND button to turn on or off the DEMO
mode.
Each press toggles between DEMO ON and DEMO
OFF.
Adjusting Display Contrast
You can adjust the audio display contrast for better
visibility.
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the DN or UP button to select
“CONTRAST.”
3
Turn the Rotary encoder to adjust the contrast of the
audio display. You can adjust in a range of –6 and +6.
The initial setting at the factory is “0.”
4
Press the SETUP button to set the selected mode.
If no button is pressed for 30 seconds, the DEMO
mode activates.
NOTES
•
The initial setting at the factory is “DEMO ON.”
•
To quit DEMO mode, set to “DEMO OFF.”
4
Press the SETUP button again to return to normal
operation.
BAND
DN UP
SETUP
Rotary encoder
SETUP Operation