Tri Power X33 Mod HP Manual | Rev 1.20 | © Alpha Technologies GmbH 2013
The purpose of this manual is to provide instructions for using the equipment safely and to carry out routine maintenan-
ce procedures.
Adjustments and extraordinary maintenance jobs are not dealt with in this manual as they are reserved exclusively to
assistance technicians, who must observe the technical and design characteristics for which the equipment was made
when working on it.
It is essential that this manual is read through but, it is not a substitute for the expertise of the technical personnel who
must have had adequate preliminary training.
The intended use and configurations envisaged for the equipment are the only ones allowed by the Manufacturer; do
not attempt to use the equipment in disagreement with the indications given.
Any other use or configuration must be agreed on beforehand with the Manufacturer in writing and, in such a case, will
be an apendix to the manual.
For its use the user must also comply with the specific laws of work that exist in the country where the equipment is
installed.
Reference is also made in this manual to laws, directives, etc., that the user must know and consult.
1.1
Overview
1. Introduction
1.2
Purpose of this manual
6
Congratulations on your purchase of a ALPHA UPS Tri Power X33 Mod HP product.
Thanks to the powerful UPS Tri Power Mod unit your critical equipment will be protected by a constant and reliable supply
of power.
ALPHA is specialized in designing and producing UPS units. The UPS Tri Power X33 Mod HP system is unique, modulear and
the state-of-art generation of three-phase medium power UPS units.
Highly reliable, low running costs and excellent electrical performance are but a few of the great features of this innovati-
ve UPS. Moreover, the criteria and methods that ALPHA uses for its design and production comply with the strictest quali-
ty standards.
The product is produced at an ISO14001 certified factory in full compliance with the eco-design laws.
The UPS system Tri Power X33 Mod HPe is made in compliance with the existing European Community directives and with
the technical standards as certified by the Declaration of Conformity issued by the Manufacturer and enclosed with this
manual.
This publication, simply defined
‘manual’
herein, contains all the information for the installation, use and maintenance of
the equipment specified in the Declaration of Conformity.
This equipment will be referred to simply as
‘equipment’
or even
‘machine’
in this manual and is manufactured by ALPHA
whose address can be found further on in this chapter.
The contents of this manual are intended for an operator who has already been instructed on the precautions to be taken
in relation to the presence of electricity.
The persons to whom this publication is addressed, normally defined ‘users’, are all those
people who, for their field of expertise, have the need and/or obligation to provide instructions or work directly on the
equipment.
These people can be the following:
- managers;
- heads of operating areas;
- department heads;
- operators directly concerned with transporting, storing, installing, using and servicing
machines from the moment they are put on the market up to the day they are scrapped;
- direct private users.
The original text of this publication, written in the Italian language, is the only reference for solving any disputes concer-
ning the interpretation of translations into Community languages. This publication is to be considered an integral part of
the equipment supplied and, as such, must be kept for future reference up until the equipment is definitively dismantled
and scrapped.