7
10.
Do not abuse cord.
Never carry the tool by the cord or yank it to disconnect
it from the receptacle. Keep cord away from heat, oil, and sharp edges.
Following this rule will reduce the risk of electric shock or fire.
11.
Make sure your extension cord is in good condition.
When using an
extension cord, be sure to use one heavy enough to carry the current your
product will draw. An undersized cord will cause a drop in line voltage resulting
in loss of power and overheating.
12.
Inspect for and remove all foreign objects from workpiece before
polishing.
Follow this rule will reduce the risk of serious personal injury.
13.
Drugs, alcohol, medication, Do not operate tool while under the influence
of drugs, alcohol, or any medication.
Follow this rule will reduce the risk of
electric shock, fire, or serious personal injury.
14.
Keep hands away from polishing area.
Follow this rule will reduce the risk
of cuts, scrapes, or serious personal injury.
15.
Ground Fault Circuit Interrupter (GFCI) protection should be provided
on the circuit or outlet to be used for the tool.
Receptacles are available
having built-in GFCI protection and may be used for this measure of safety.
16. Save these instruction.
Refer to them frequently and use them to instruct
others who may use this tool. If you loan someone this tool, loan them these
instructions.
USE PrOPEr EXTENSiON COrDS
Use only three-wire extension cords that have three-prong grounding-type plugs
and three-pole receptacles that accept the tool’s plug. Make sure your extension
cord is in good condition. Replace or repair damaged or worn cord immediately.
When using an extension cord, be sure to use one heavy enough to carry the
current your product will draw. An undersized cord will cause a drop in line voltage
resulting in loss of power and overheating. Below table shows the correct size to
use depending on cord length and nameplate ampere rating. If in doubt, use the
next heavier gauge. The smaller the gauge number, the heavier the cord.
Ampere Rating
Total length of cord in feet (120V )
25ft 50ft
100ft
More Than
Not More Than
AWG
0
6
18
16
16
6
10
18
16
14
10
12
16
16
14
12
16
14
12
Not Recommended
Содержание VSP-120
Страница 27: ...25 ALPHA VSP 120 SCHEMATIC ...
