Alpha Professional Tools VSP-120, Инструкция по эксплуатации

Страница: 7 / 36

5
•
Dress properly. Do not wear loose clothing or jewelry.
Contain long hair.
Keep your hair, clothing, and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts or drawn into air vents.
• Avoid accidental starting. Be sure switch is off before plugging in. Carrying
tools with your finger on the switch or plugging in tools that have the switch
on, invites accidents.
•
Remove adjusting keys or wrenches before turning the tool on
. A wrench
or a key that is left attached to a rotating part of the tool may result in personal
injury.
•
Do not overreach
. Keep proper footing and balance at all times. Proper footing
and balance enables better control of the tool in unexpected situations. Do
not use on a ladder or unstable support.
• Use safety equipment . Always wear eye protection. Dust mask, nonskid
safety shoes, hard hat, or hearing protection must be used for appropriate
conditions.
•
TOOL USE AND CArE
•
Use clamps or other practical way to secure and support the workpiece to
a stable platform . Holding the work by hand or against your body is unstable
and may lead to loss of control.
•
Do not force tool, use the correct tool for your application.
The correct
tool will do the job better and safer at the rate for which it is designed.
•
Do not use tool if switch does not turn it on or off
. Any tool that cannot be
controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from power source before making any adjustments,
changing accessories, or storing the tool . Such preventive safety measures
reduce the risk of starting the tool accidentally.
•
Store idle tools out of the reach of children and other untrained persons.
Tools are dangerous in the hands of untrained users.
•
Maintain tools with care.
Keep tools sharp and clean for better and safer
performance. Follow instructions for lubricating and changing accessories.
Inspect the electrical cord periodically and if damaged, have it repaired by
authorized service facility. Inspect extension cords periodically and replace if
damaged. Keep handles dry, clean and free from oil and grease.
• Check for damaged parts . Before using the tool each day, a guard or other
part that is damaged should be carefully checked to determine that it will
operate properly and perform its intended function. Check for alignment of
moving parts, breakage of parts, mounting, and any other conditions that may
affect its operation. A guard or other part that is damaged should be properly
repaired or replaced by an authorized service center unless otherwise indicated
elsewhere in this instruction manual. Have defective switches replaced by
authorized service center. Do not use the tool if it cannot be turned on and
off by the switch.