14
SiDE HANDLE iNSTALLATiON
During the use of Alpha
®
Core Bits and Profilers, use of the center handle is
recommended. The center handle will allow the operator to have better control and
ease of operation during these applications.
To switch from center handle to side handle, follow the steps below:
CAUTION!
Figure-12
Figure-13
Figure-14
Remove both side crews from
center handle.
Pull handle forward and clear
of polisher.
Thread the sidehandle into
either the left or right side of
the polisher, then thread one
screw into the opposite side
of the handle.
Содержание VSP-120
Страница 27: ...25 ALPHA VSP 120 SCHEMATIC ...
