Page
46
to
62
ESS LIO-I 4810
ID switch
ID Switch indicates the unique ID code for each battery module. It's required to assign an identical ID to
each battery module for normal operation. We can set up the ID code for each battery module by rotating
the PIN number on the ID switch. From number 0 to 9, the number can be random; no particular order.
Maximum 10 battery modules can be operated in parallel.
Installation and Operation
After ID no. is assigned for each battery module, please set up LCD panel in inverter and install the wiring
connection as following steps.
Step 1: Use supplied RJ11 signal cable to connect into the extension port ( P1 or P2 ).
Step 2: Use supplied RJ45 cable (from battery module package) to connect inverter and Lithium battery.
