Page
5
to
62
INSTALLATION
Unpacking and Inspection
Before installation, please inspect the content. Be sure that nothing inside the package is damaged. You should
have received the following items inside the package:
Inverter x 1
User manual x 1
RS232 Communication cable x 1
Software CD x 1
DC Fuse x 1
Preparation
Before connecting all wirings, please take off the bottom cover by removing two screws as shown below. Detach
the cables from the cover.
Mounting the Unit
Consider the followings before selecting your placements:
Do not mount the inverter on flammable construction
materials.
Mount on a solid surface
Install the inverter at eye level in order to allow easy
LCD display readout.
For proper air circulation and heat dissipation, allow a
clearance of approx. 20 cm to the side and approx. 50
cm above and below the unit and 100cm to the front.
The ambient temperature should be between 0°C and
55°C to ensure optimal operation.
The recommended orientation is to adhere to the wall
vertically.
Be sure to keep other objects and surfaces as shown in
the diagram to guarantee sufficient heat dissipation and
to have enough space for wirings.
