SNQ-60x0-320F Series Data Center Switch
Hardware Installation Guide
5
Figure 4-3 Back Panel of SNQ-60x0-320F Series Switch with AC Power Supply Module
Figure 4-4 Back Panel of SNQ-60x0-320F Series Switch with DC Power Supply Module
The following table lists the slots and modules found on the back panel of the switch.
Number Component
Amount Airflow
Description
1
Fan Module
Slots
5
Front-to-Back OR
Back-to-Front
There are 5 fan module slots on this switch. 4 fan modules
are included. An additional fan module can be bought
separately to improve airflow.
2
Power Supply
Module Slots
2
Front-to-Back OR
Back-to-Front
There are 2 power supply module slots on this switch. 1
power supply module is included (either AC or DC). An
additional power supply module can be bought
separately to improve redundancy.
Note:
For more information about fan module installation, refer to the
Installing Fan Modules into the
Fan Module
section later on.
Note:
For more information about power supply module installation, refer to the
Installing Power
Modules into the Power Module Slots
and section later on.
Power Supply Modules
Switches in this series can either be AC powered or DC powered depending on the power supply modules used. After
the initial purchase of a switch in this series, at least one power supply module will be included in the package. This
power supply can either be one of the following:
AC Power Supply Modules
AC-0460W-12-FB:
AC Power Supply (Front-to-Back Airflow), 100 VAC to 240 VAC, 460 Watt.
AC-0460W-12-BF:
AC Power Supply (Back-to-Front Airflow), 100 VAC to 240 VAC, 460 Watt.
DC Power Supply Modules
DC-0800W-12-FB:
DC Power Supply (Front-to-Back Airflow), -40.5 VDC to -60 VDC.
DC-0800W-12-FB:
DC Power Supply (Back-to-Front Airflow), -40.5 VDC to -60 VDC.
1
2
1
2
