Alpha-InnoTec LWC 100, Руководство по эксплуатации

Страница: 5 / 56

5
We reserve the right to modify technical specifications without prior notice.
UK830504/210627
© Alpha-InnoTec GmbH
CautIon.
Install the heat pump only indoors and
operate only with outside air as the heat
source. the air ducts must discharge into
the open air. Do not restrict or block the
air ducts.
dimensional drawing and installation plan for
respective model.
WarnIng!
switch on unit only if air ducts are
mounted on the unit.
take measures on the fan side to prevent
injuries from the rotating fan (above-
ground air duct discharge: below-ground
air-channel discharge: wire mesh grille
– accessories not included in scope of
delivery).
CautIon!
the integration of the heat pump in
ventilation systems is not permissible. the
use of the cooled air for cooling purposes
is not permitted.
CautIon!
the ambient air in the location where the
heating pump is installed and also the in-
take air which is used as a source of heat
must not contain any kind of corrosive
components!
Components such as ammonia, sulphur,
chlorine, salt, sewer gas, flue gases etc.
may cause damage leading to complete
failure or even a total write-off of the
heating pump!
CautIon!
In the air outlet area the air temperature
is ca. 5 K below the ambient temperature.
under certain climatic conditions,
therefore, an ice layer can form in the
air outlet area. Install the heat pump so
that the air blower does not blow in the
direction of footpaths.
Customer service
for technical assistance, please contact your qualified
technician or the manufacturer's local service partner.
overview “customer service”.
warranty / Guarantee
for warranty and guarantee conditions, please refer to
the purchase documents.
notICe.
please contact your dealer concerning
warranties and guarantees.
Disposal
When decommissioning the unit, always comply with
applicable laws, directives and standards for therecovery,
recycling and disposal of materials and components of
cooling units.
dismantling.