SEED-DRILLSSEMINATRICE PNEUMATICA JET-M
Old Cod.Q00A00168
New Cod. MANT2018/00060 R.2
INSTALLATION
- 12
Copyright ©2009 della Alpego srl ® -Tutti i diritti sono riservati. È espressamente vie
tata la ristampa o l’uso non autorizzato per iscritto da parte di Alpego srl
INSTALLATION “AUTO-LEVEL” CONFIGURATION
The operation must be carried out on a horizontal plane, with the power harrow in a stable position and the
supporting legs of the seeding bar inserted.
Follow the following steps
:
1. Install the brackets M on the roller at a distance L of 1130mm (figure 6)
2. Assemble the telescopic arms G in the correct position according to the machine configuration (figure 7)
POWER HARROWS
ROLLER
POSITION
LENGHT (L1)
HOLES
RM / RK
PK5
2-4
961
C3
RK
PK6
1-3
1001
C4
RMAX
PK5
1-3
1001
C4
3. Assemble the arms
G
just assembled in the holes
A
of the seed-drill (figure 8)
4. Fix the tie rods
T1
in the holes
B
of the seed-drill (figure 8) , paying attention to position C (figure 8 and 9) of the
upper hole according to the machine configuration
5. Fix the tie rod
T3
in the correct holes according to the machine configuration (figure 7)
POWER HARROWS
ROLLER
POSITION
RM / RK
PK5
E2
RK
PK6
E1
RMAX
PK5
E1
6. Combine the two telescopic arms through the frame
H
(figure 8)
7. Prepare for the seeding bar a Picture assembly operation
