SEED-DRILLSSEMINATRICE PNEUMATICA JET-M
Old Cod.Q00A00168
New Cod. MANT2018/00060 R.2
INSTALLATION
- 9
Copyright ©2009 della Alpego srl ® -Tutti i diritti sono riservati. È espressamente vie
tata la ristampa o l’uso non autorizzato per iscritto da parte di Alpego srl
4. INSTALLATION
4.1. APPLYING THE SEED BOX FAST COUPLING
All maintenance, adjustment and work preparation operations
should
be carried out while the tractor is switched off, with the ignition key
out and with the seed-drill positioned on the ground in a stable
manner on its support legs.
In order to mount the seed-drill on a seedbed preparation implement all that needs to be
done is to attach the quick coupling
A
to the implement, to secure it with the relevant pins
B
and to insert the pins
C
, as shown in the picture.
The fast coupling can only be used with
ALPEGO
machines.
4.2. CONNECTION OF THE FRONT HOPPER WITH ALPEGO
MACHINES
The seeder is designed to be combined just with power harrows / rotary tillers / cultivators Alpego:
the connection of the machines requires intervention and preventive checks on each implement.
Applying things to the tractor is a very dangerous operation. Be very careful to complete the
whole operation and follow the given instructions.
During maneuvers it does not allow the approach of
people or animals to the radius of action of the machine
Proceed as follows
:
1. For the correct use of the "ALPEGO" quick assembly/disassembly system, lift the seed-drill to the minimum height
to allow manoeuvring. If there are any supporting legs, check the stability of the seed-drill.
2. Drive the tractor close to the seed-drill. By using the tractor lift take position vertically on the pin of the upper arm of
the seed-drill (Picture 1)
3. Lift the power harrow and secure it with the pin of the upper arm of the seed drill (Picture 1)
4. After the hitching has been achieved, insert the pins D, in order to secure the seed-drill on the power harrow
(Picture 2)
Picture 1
Picture 2
