Aloka ProSound Alpha 10 Скачать руководство пользователя страница 351

Страница: 351 / 405

MN2-2008, Rev.2

SECTION 10

Parts List

10 - 3

10-4

Explanation of Parts List

This Parts List is divided by some blocks (INDEX), and each block consists of the illustration and list.

INDEX

The number of the division for each Parts List (illustrations and Lists). This is indicated
in the illustration for whole equipment at the beginning.

UNIT

The name of this block (or unit) indicated by

INDEX

If the same block or unit will be revised, it will be distinguished with this and next

S/N

S/N

If the same block or unit will be revised, it will be distinguished with

UNIT

, and this

shows the beginning of production change.

Item

Relation numbers between illustration and List.
If the item number is described in brackets

”

()

”

, it may not be available. Instead, please

choose the substitution shown with same item number.

Code

Code number applied one by one to each parts. However, at this time (Apr. ’08), it is not
acceptable to order.

Part number

Parts number

Serial Number

Applied serial number.
If it shows “

xxxxx~

“, the part is available to serial number or after. On the other side,

“

~xxxxx

” means valid to the serial number and before. If the blank, If the blank, it is not

depended on the serial number.

Spec.

The specification, some differences on shipment, and the other remarks are shown.

INDEX

UNIT

S/N

USI-148

Item

Code

Part number

Description

Serial

Number

Spec.

A200876

SAP-1700-01-01

COVER:TOP

(2)

A120026

PSC-116#7

INTERMEDIATE DECK COVER

~6200030

A120027

PSC-116#7B

INTERMEDIATE DECK COVER

6200031~

A800041

L-CABLE-216

CABLE:J705-J607

For OPTION

A120033

PSC-116#8

PROBE HOLDER

MAIN BODY

Index number linked to drawing

Description of Index

Model name of Index

Range of serial numbers to apply

Item number linked to drawing

Part Code (currently not used)

Part number for each item

Part description for each item

Range of serial numbers to apply

Specification for each item

Содержание ProSound Alpha 10






















































































































































































































































































































































































































Результаты поиска

Содержание ProSound Alpha 10

Отзывы:

Aloka ProSound Alpha 10, Руководство по обслуживанию, Страница: 351 / 405

Результаты поиска

Содержание ProSound Alpha 10

Отзывы: