Aloka ProSound Alpha 10 Скачать руководство пользователя страница 153 | Manualshive

Страница: 153 / 405

Aloka ProSound Alpha 10 Скачать руководство пользователя страница 153

MN2-2008 Rev.1

SECTION 8

Performance Check

8 - 9

image missing. The image printed by the color printer must be free of tint and color
misalignment.

10) VCR (OPTION: With the SVO-9500MD(P)2 or HV-MD3000*(2) connected)

Before performing the following checks, check that the VCR is connected properly.

"

External input
An external input image from the VCR must be output to the monitor with the EXT
switch. The image must be displayed correctly without synchronization failure, etc.

"

FREEZE
The VCR playback image must be made freeze with the FREEZE switch.

"

Playback measurement
With the VCR playback image made freeze, measurement of the playback image must be
possible.

"

Audio
The audio must be recorded and played back normally.
In addition, when you connect microphone to MIC connector on the operation panel, this
audio must also be recorded and played back normally.

"

Remote control
The REC, and Pause for the VCR must be controlled from the EXT menu on the LCD
touch panel.
The counter must be displayed on TV monitor during the recording. And the counter
must change during the played back normally.

11) DVD-recorder (OPTION: With the BD-X201M* or DVO-1000MD connected)

Before performing the following checks, check that the DVD-recorder is connected properly.

"

External input
An external input image from the DVD-recorder must be output to the monitor with the
EXT switch. The image must be displayed correctly without synchronization failure, etc.

"

FREEZE
The DVD-recorder playback image must be made freeze with the FREEZE switch.

"

Playback measurement
With the DVD-recorder playback image made freeze, measurement of the playback
image must be possible.

"

Audio
The audio must be recorded and played back normally.
In addition, when you connect microphone to MIC connector on the operation panel, this
audio must also be recorded and played back normally.

"

Remote control
The Play, and Pause for the DVD-recorder must be controlled from the EXT menu on the
LCD touch panel.
The counter must be displayed on TV monitor during the recording. And the counter
must change during the played back normally.

12) FOOT SWITCH (OPTION: With the MP-2345* or MP-2614* connected)

Operation of the functions assigned by the preset must be possible.

«
...
151
152
153
154
155
...
»

Содержание ProSound Alpha 10






















































































































































































































































































































































































































Отзывы:

Нет отзывов