Aloka ProSound Alpha 10 Скачать руководство пользователя страница 109 | Manualshive

Страница: 109 / 405

Aloka ProSound Alpha 10 Скачать руководство пользователя страница 109

MN2-2008, Rev.2
SECTION 4

Principle of System Operation

4 - 76

Main Panel: L-KEY-84* (Operation Panel)

Main Panel reads the status of switches, potentiometers, full keyboard and trackball then
communicates with the CPU via USB.

Main Panel includes the 8.4 inches SVGA colour LCD with touch screen as well.
The video is displayed directly from the CPU and the status of LCD panel (Touch screen
and encoders) is transferred to the CPU with other panel information by serial
communication.

Address bus, Data bus

For controlling the system, the machine is equipped with the address/data bus below.

UC Bus:

Ultrasonic Beam Forming Control BUS. It is used for accessing to the
control register of Tx/Rx part

UAT Bus:

Ultrasonic Acquisition Timing BUS. It provides clock and timing
signals for transmission/reception of ultrasound. Timing Processor
generates those timing signals.

USC Bus:

Ultrasonic System Control BUS. It connects the Tx/Rx part and the
DIU part.

cPCI Bus:

Compact PCI BUS. It connects the CPU and the DIU part. CPU
accesses to each hardware via this bus and controlling the registers
and transferring the data.

There is Bus Bridge between PCI BUS and UC BUS. It connects both bus only when the
CPU accesses to Tx/Rx part in order to avoid the system noise leaking into it.

«
...
107
108
109
110
111
...
»

Содержание ProSound Alpha 10






















































































































































































































































































































































































































Отзывы:

Нет отзывов