Aloka ProSound Alpha 10, Руководство по обслуживанию, Страница: 25 / 405

MN2-2008
SECTION 3 Before Repairing
3 - 5
Procedure 7 Judgment of the operation quality
If the result of “Procedure 6” is passed to the all standards, do the next “Procedure 8”. On the other
side, if not, make a judgment of “Procedure 10”.
Procedure 8 Confirm by customer, make repair report and approve
Reconfirm the solution of trouble phenomenon with the customer. Then make a repair report and
obtain approval of customer.
The repair report shows not only the treatment but also the method of readjustment and operation
check. If they have been done according to the service manual, the followings have to be shown,
Readjusted according to the Section 7 of service manual.”
Checked according to the Section 8 of service manual, and passed.”
Procedure 9 Presentation of report and order to repair parts
Fill the repair report with necessary item, and present it according to the certain procedure.
If the defective parts that trouble cause included is available to use again by repair, make an order
to do. If you cannot judge whether the part can be used again or not, ask to the
Technical Support .
Procedure 10 Judgment of possibility to repair again
As the result of judgment on “Procedure 7”, if the trouble is not solved, judge the possibility to
make the repair work again.
If available, return to “Procedure 5” and continue to work.
If unavailable, go to “Procedure 11”.
Procedure 11 Indication of the prohibition to use
As the result of judgment on “Procedure 10”, if you judge that it is impossible to continue the
repair work at this time, indicate that the equipment is still out of order, and also show the
prohibition to use, on the equipment.
Procedure 12 Report to the customer
Report the reason why the trouble cannot be solved to the customer. Then consult about the plan of
next repair work.
And do the same way from “Procedure 2”.