Aloka ProSound Alpha 10 Скачать руководство пользователя страница 152 | Manualshive

Страница: 152 / 405

Aloka ProSound Alpha 10 Скачать руководство пользователя страница 152

MN2-2008 Rev.1
SECTION 8

Performance Check

8 - 8

"

CD-R drive
Any images must be copied to CD-R from Review screen. And copied images must be
displayed on review screen.

"

USB flash memory

(OPTION: With the JB-284 connected)

The preset data must be copied to USB flash memory from Preset Control Screen. And
the preset data must be restored from USB flash memory.

7)

Network

The following network functions must operate normally. It is not necessary to confirm the

functions not in use.

"

Worklist

(with optional SOP-ALPHA10-10 installed)

Worklist ping and Worklist C-ECHO must success on Common preset screen.
Scheduled patient list must be displayed by pressing Find button on New patient screen.

"

Image storage

(With optional SOP-ALPHA10-10 installed)

Remote ping and Remote C-ECHO must success on Common preset screen.
Single and multi-frame must transfer to the DICOM server correctly.

"

MPPS

(With optional SOP-ALPHA10-10 installed)

Ping and C-ECHO for MPPS (Modality Performed Procedure Step) server must success
on Common preset screen.
MPPS screen must be displayed by changing patient or pressing End Study switch.
MPPS command must send to the MPPS server correctly.

"

Storage Commitment

(With optional SOP-ALPHA10-10 installed)

Ping and C-ECHO for Storage Commitment server must success on Common preset
screen.
The color of icon on thumbnail screen must be changed to dark blue within defined
period on IHE screen.

"

SR

(With optional SOP-ALPHA10-10 and SOP-ALPHA10-21 installed)

Ping and C-ECHO for SR (Structured Report) server must success on Common preset
screen.
Created SR data must transfer to the SR server.

8)

Photographing unit

Before making the following checks, check that the photographing unit is connected properly.

"

Analog thermal printer

(OPTION: UP-895*, UP-897*, UP21MD*, P93* and/or CP900* connected)

When you press the photographing unit Rec switch set by the preset, the same image as
displayed on the monitor must be recorded. The recorded image must be free of skew, tilt,
and image missing. The image printed by the color printer must be free of tint and color
misalignment.

"

Digital thermal printer

(OPTION: UP-D897 and/or UP-D23MD connected)

When you press the photographing unit Rec switch set by the preset, the same image as
displayed on the monitor must be recorded. The recorded image must be free of skew, tilt,
and image missing. The image printed by the color printer must be free of tint and color
misalignment.

9)

PC printer (OPTION)

Before making the following checks, check that the PC printer is connected properly.

When you press the PC printer Rec switch set by the preset, the same image as displayed on
the monitor must be recorded. And also when you select report printing, report screen must
be printed corresponding to the settings. The printed image must be free of skew, tilt, and

«
...
150
151
152
153
154
...
»

Содержание ProSound Alpha 10






















































































































































































































































































































































































































Отзывы:

Нет отзывов