FORM DOC 120 A
MU 7093 EN C
DUAL TRONIQUE
Page 5/69
This document is available on www.alma-alma.fr
1
GENERAL PRESENTATION AND DESCRIPTION
The DUAL TRONIQUE is a system that can manage one or two measuring systems based on a
single calculator-indicator MIC.
These measuring systems are fitted on a road tanker. It measures liquids other than water either
by gravity or by pumping.
When the system manages a single measuring system, it is called EMA.
When the system manages two measuring systems, they are called EMA and EMB.
The measuring systems are:
Certified type (see the relevant EC-type or EU-type examination certificate)
Of same model or of different models
The DUAL TRONIQUE comprises at least:
Presentation of the MIC mono or dual:
One or two measuring systems
A set of delivery hose(s) that depends on the measuring system
It performs the following functions:
Measure products when they are delivered to the station, with or without volume preset
Split compartments
Control the product movements (transfer, loading, return, purge, draining)
Depending on the hydraulic configuration, the system can manage one or two distribution ways:
On EMA: One distribution way full hose or empty hose or two distribution ways: hose 1 and 2
On EMB: One distribution way full hose or empty hose
If the feature is enabled a delivery channel is available for pumped not counted distribution.
According to hardware configuration, it controls up to nine compartments. You can configure 16
different products.
It can be connected to DSPGI anti-contamination systems. DSPGI devices provide product
identification for each compartment and update the MIC. This eliminates any mixture
of product. Each compartment is equipped with a DSPGI.
The system can control one or two additive injection devices. This injection has to occur upstream
the meter.
In option, the system controls the product temperature.
In addition, it may be connected to a printer for delivery tickets, internal totalisers, parameters or
diary printings.
NOTE
: The information printed by the printer has no metrological value. Only the indications
displayed by the indicator shall be considered legally valid.
