Configuration of the camera
STINGRAY Technical Manual
V4.4.2
306
Maximum resolution
This register indicates the highest resolution for the sensor and is read-only.
Time base
Corresponding to IIDC, exposure time is set via a 12-bit value in the corre-
sponding register (SHUTTER_INQ [51Ch] and SHUTTER [81Ch]).
This means that you can enter a value in the range of 1 to 4095.
Stingray cameras use a time base which is multiplied by the shutter register
value. This multiplier is configured as the time base via the TIMEBASE regis-
ter.
The time base IDs 0-9 are in bit [28] to [31]. See
page 307. Refer to the following table for code.
Default time base is 20 µs: This means that the integration time can be
changed in 20 µs increments with the shutter control.
Note
This register normally outputs the MAX_IMAGE_SIZE_INQ
Format_7 Mode_0 value.
This is the value given in the specifications tables under
Picture size (max.) in Chapter
50ff.
Register
Name
Field
Bit
Description
0xF1000200
MAX_RESOLUTION
MaxWidth
[0..15]
Sensor width
(read only)
MaxHeight
[16..31] Sensor height
(read only)
Table 133: Advanced register:
Maximum resolution
inquiry
Register
Name
Field
Bit
Description
0xF1000208
TIMEBASE
Presence_Inq
[0]
Indicates presence of this
feature (read only)
---
[1..7]
Reserved
ExpOffset
[8..19]
Exposure offset in µs
---
[20..27] Reserved
Timebase_ID
[28..31] See
Table 134: Advanced register:
Time base