background image

Description of the data path

STINGRAY Technical Manual

 

V4.4.2

131

Manual gain

Stingray cameras are equipped with a gain setting, allowing the gain to be 

manually

 adjusted on the fly by means of a simple command register write.

The following ranges can be used when manually setting the gain for the ana-
log video signal:

Brightness (black level or offset)

It is possible to set the black level in the camera within the following ranges:

0 ... +16 gray values (@ 8 bit)

Increments are in 1/64 LSB (@ 8 bit)

The IIDC register brightness at offset 800h is used for this purpose.

Note

Values can only be changed within the limits of gain 
CSR.

Changes in auto exposure register only have an effect 
when auto gain is active.

Auto exposure limits are 50..205. (

SmartView

Ctrl1 

tab

Target grey level

)

Type

Range

Range in dB

Increment length

Stingray color cameras  0 ... 680

0 ... 24.4 dB

 ~0.0359 dB/step

Stingray b/w cameras

0 ... 680

0 ... 24.4 dB

 Table 45: Manual gain range of the various Stingray types

Note

Setting the gain does not change the offset (black 
value)

A higher gain produces greater image noise. This 
reduces image quality. For this reason, try first to 
increase the brightness, using the aperture of the cam-
era optics and/or longer shutter settings.

Note

Setting the gain does not change the offset (black 
value).

Содержание Stingray






































































































































































































































































































































































Отзывы: