Configuration of the camera
STINGRAY Technical Manual
V4.4.2
330
To switch on
Quick Format Change Mode
do the following:
1.
Set UpdTiming to 2.
2.
Set UpdActive to 1.
3.
Be aware that all parameter values have to be set within 10 seconds.
Automatic reset of the UpdActive flag
With
Quick Format Change Mode
you normally have to clear the
UpdActive
flag after all desired parameters have been set. Every time the
PARAMUPD_TIMING
register is written to with the
UpdActive
flag set to 1
a 10 second time-out is started / restarted. If the time-out passes before you
clear the
UpdActive
flag, the
UpdActive
flag is cleared automatically and all
parameter changes since setting the
UpdActive
flag to 1 become active auto-
matically.