Specifications
STINGRAY Technical Manual
V4.4.2
50
Specifications
STINGRAY F-033B/C (fiber)
Note
•
For information on bit/pixel and byte/pixel for each
color mode see
•
Maximum protrusion
means the
distance from lens
flange to the glass filter in the camera
.
Feature
Specification
Image device
Type 1/2 (diag. 8 mm) progressive scan SONY IT CCD ICX414AL/AQ with
HAD microlens
Effective chip size
6.5 mm x 4.9 mm
Cell size
9.9 µm x 9.9 µm
Picture size (max.)
656 x 492 pixels (Format_7 Mode_0)
Lens mount
C-Mount: 17.526 mm (in air); Ø 25.4 mm (32 tpi)
maximum protrusion: 10.1 mm
Figure 39: Stingray C-Mount dimensions
CS-Mount: 12.526 mm (in air), Ø 25.4 mm (32 tpi)
maximum protrusion: 5.1 mm
Figure 38: Stingray CS-Mount dimension
Note:
Maximum protrusion
means the distance from lens flange to the
glass filter in the camera.
ADC
14 bit
Color modes
Only color:
Raw8, Raw12, Raw16, Mono8, YUV422, YUV411, RGB8
Frame rates
1.875 fps; 3.75 fps; 7.5 fps; 15 fps; 30 fps; 60 fps
Up to 84 fps in Format_7
Gain control
Manual: 0-24.4 dB (0.0359 dB/step); auto gain (select. AOI)
Shutter speed
31
µs … 67,108,864 µs (~ 67 s); auto shutter (select. AOI)
External trigger shutter
Programmable, trigger level control, single trigger,
bulk trigger, programmable trigger delay
Internal FIFO memory
32 MByte, up to 50 frames
Look-up tables
User programmable (12 bit
10 bit); default gamma (0.45)
Table 12: Specification STINGRAY F-033B/C (fiber)