Allied Vision Goldeye CL Series, Техническое руководство

Страница: 103 / 254

Specifications
103 Goldeye G/CL Technical Manual V4.2.0
Output
GPIOs
A/D converter 14-bit
Image buffer size 256 MB
Stream hold capacity 392 frames at full resolution
Parameter Values
Digital interface Camera Link Base, up to 2 taps, 85 MHz, SDR-26 connector,
Serial Control Channel
Bit depth 8-bit, 12-bit, 14-bit
Pixel formats • Tap geometry 1X 1Y: Mono 8, Mono 12, Mono 14
• Tap geometry 1X2 1Y: Mono 8, Mono 12
Table 45: Goldeye CL-034 TEC1 output
Parameter Values
Opto-isolated I/Os 1 input, 2 outputs
RS232 up to 115,200 bits per second, 8N1 (adjustable)
LVTTL I/Os 1 input, 1 output
LVDS inputs CC1 - CC4
Table 46: Goldeye CL-034 TEC1 GPIOs
Parameter Values
1
Typical values that are determined similar to EMVA 1288 under 1200 nm LED illumination. Given values are mean
values of multiple different measurements at +20 °C FPA temperature, if not stated otherwise.
2
Measured with CDS delay of 12 µs.
3
Maximum exposure value given is valid for Gain0 and sensor temperature of +25°C. Even longer exposures can be
set, but the image quality may deteriorate.
Table 44: Goldeye CL-034 TEC1 imaging and performance (sheet 2 of 2)