Allied Vision Goldeye CL Series, Техническое руководство

Страница: 170 / 254

Filters and mounts
170 Goldeye G/CL Technical Manual V4.2.0
Changing the filter in the F-Mount adapter
If the F-Mount adapter has an optical filter fitted, it is possible to change the
optical filter. (See
Bandpass filters 1450 nm assembled on page 178 for more
details on mount adapters with pre-fitted filters.)
To change the filter of the F-Mount lens adapter, follow the instructions outlined.
Removing the adapter from the camera
1. Remove the lens that might be screwed into the F-Mount adapter.
2. Unscrew the adapter (1) from the camera.
- Loosen the locking screw (2, shown from back of adapter) on the outside
of the mount adapter. See
Figure 41 on page 164 for the position of the
locking screws.
Use a 1.3 mm hex key for Goldeye models with Cool housing:
G/CL-008 Cool and G/CL-032 Cool.
Use a 0.9 mm hex key for all other models.
- To avoid penetration of foreign substances into the camera, ensure that
the front flange is covered with a dust cap. See
Avoiding the necessity of
camera cleaning on page 246 .
Removing the filter from the mount
1. On the back side of the mount, loosen the three cylinder bolts (5) of the filter
fixing ring (4), using a Torx T6 tool.
2. Remove the fixing ring.
3. Remove the existing optical filter (3) from the adapter.
Figure 46: Changing the filter in the F-Mount adapter
1
2
3
4
5