Allied Vision Goldeye CL Series, Техническое руководство

Страница: 90 / 254

Specifications
90 Goldeye G/CL Technical Manual V4.2.0
Goldeye CL-033 TEC1
Imaging and performance
Parameter Values
Sensor InGaAs, progressive scan, electronic full frame shutter
Sensor type FPA
Spectral range 900 nm to 1700 nm
Resolution (H) × (V) 640 × 512
Pixel size 15 μ m × 15 μ m
Effective chip size 9.6 mm × 7.68 mm
Dark current
110 ke ¯ /s
1
Temporal dark noise (Gain0)
390 e ¯
1, 2
Temporal dark noise (Gain1)
53 e ¯
1, 2
Temporal dark noise (Gain2)
32 e ¯
1, 2
Saturation capacity (Gain0)
1.2 Me ¯
1, 2
Saturation capacity (Gain1)
84.8 ke ¯
1, 2
Saturation capacity (Gain2)
25 ke ¯
1, 2
Dynamic range (Gain0)
69 dB
1, 2
Dynamic range (Gain1)
64 dB
1, 2
Dynamic range (Gain2)
59 dB
1, 2
Pixel operability >99.5%
Maximum frame rate
at full resolution 301 fps (8-bit and 12-bit pixel format)
Exposure time
1 µs to 200 ms
3
Temperature control Single-stage thermo-electric cooling (TEC1)
Analog gain levels Gain0, Gain1, Gain2
Gain factor (Gain 1) 14
Gain factor (Gain 2) 45
1
Typical values that are determined similar to EMVA 1288 under 1200 nm LED illumination. Given values are mean
values of multiple different measurements at +20 °C FPA temperature, if not stated otherwise.
2
Measured with CDS delay of 12 µs.
3
Maximum exposure value given is valid for Gain0 and sensor temperature of +25°C. Even longer exposures can be
set, but the image quality may deteriorate.
Table 32: Goldeye CL-033 TEC1 imaging and performance (sheet 1 of 2)