Chapter 2: LED Indicators and back panel
Page
5
2 LED Indicators and back panel
Before you begin with the installation, please take a moment to become more
familiar with the LED indicators and back panel of the CopperJet.
2.1 CopperJet 416 LED indicators
Phone:
The Phone led will blink when the connected POTS phone receives an
incoming call. During an analogue modem connection, blinking
indicates that echo cancellation is switched off.
The Phone led illuminates when the connected POTS phone is off-
hook.
USB:
The USB led will illuminate when you connect the CopperJet to the
USB port on your PC, and the USB drivers are installed.
Eth:
The Ethernet led will illuminate when you connect the CopperJet to
the Ethernetport on the PC or hub/switch.
DSL:
Blinking indicates that the DSL protocols starts handshaking.
Illuminates when the SHDSL network is correctly configured and
connected.
Power:
When the CopperJet is connected to a power source, the Power LED
will illuminate.
2.2 CopperJet 416 back panel
PWR
USB
LINE
ETH
1
2
3
4
Phone
Back panel
PWR:
Only the power adapter that comes with the package can be
connected to the power jack.
PHONE:
To connect your POTS Telephone to the CopperJet
LINE:
To connect the CopperJet to the SHDSL line of your provider.
