Chapter 6.2: Advanced Voice over DSL Configuration
Page
17
If you want to carry out further configuration of your DHCP Server, click on the
Advanced Options page at the bottom of the DHCP configuration page. The Edit
DHCP Server page is displayed.
This page allows you to edit the options that appear on the DHCP Server page.
Default lease time:
If the client that requests the lease, does not ask for
a specific expiry time (43200) the default time (in
seconds) will be assigned to a lease
Allow Bootp:
True: DHCP server responds to BOOTP queries.
False: DHCP server does not respond to BOOTP
queries.
Max lease time:
The maximum time (in seconds) that a subnet
assigns to a lease if the client requesting the lease
does not ask for a specific expiry time (86400).
Allow Unknown Clients:
True: Allows IP addresses to be dynamically assigned
to unknown clients.
False: Does not allow IP addresses to be dynamically
assigned to unknown clients.
Enabled: True: DHCP server is enabled.
False: DHCP server is disabled.
After changing the settings, click on the Change button to activate the new
settings. Go to the Configuration menu and click on Save config to save the new
settings into the CopperJet.
