Chapter 6.2: Advanced Voice over DSL Configuration
Page
13
5.3 LAN
Connections
LAN Connections allows you to add, configure and remove the Ethernet and/or
USB connections. It is also used to assign IP addresses to these connections. The
Ethernet connection CANNOT be removed only edited.
Go to the Configuration menu and click on LAN connections. The LAN Connections
page is displayed.
This page displays a table that lists all existing LAN connections. This table
contains the following information:
Service Name:
Name of the LAN port
IP/Bridge Interface:
Internal name of the LAN port.
Description:
Description of the connection.
Creator:
Which management entity the service was created in;
CLI, Firmware, WebAdmin or Factory Defaults.
5.3.1 Create a new LAN connection
To create a LAN connection, click on the Create a new service command. A page
containing the service options that are available to you will be displayed. Select
the service that you want to create. Click on the Configure button to display the
service configuration page. You need to enter information, specific to the service
that you are creating.
Click on Apply. The LAN connections page is displayed. The table now contains
details of the service that you have just created.
5.3.2 Delete a LAN connection
To delete a configured LAN connection, click on the Delete… hyperlink of the LAN
connection. Check the details of the LAN connection that you want to delete, then
click on Delete this connection.
