Chapter 6.2: Advanced Voice over DSL Configuration
Page
25
5.4.2 Configuring RFC1483 Routed
A RFC 1483 Routed connection is used when your Service Provider delivers a
routed connection between the CopperJet and the Service Provider Network.
You need to add detailed configuration information about the WAN service that
you are creating. This information must be provided by your service provider.
Description:
RFC1483, this is the default WAN connection name.
VPI:
Virtual Path Identifier. A field in the ATM header. The
VPI is used to identify the virtual path that a circuit
belongs to. The VPI can be any value between 0 and
4095.
VCI:
Virtual Channel Identifier. Part of the ATM header.
The VCI is a tag that identifies which channel a cell
will travel over. The VCI can be a value between 1
and 65535.
Encapsulation:
LLC/SNAP. Ethernet over LLC/Snap. This is a bridge
connection method and is the default setting of
RFC1483.
Use DHCP:
When your ISP automatically allocates an IP address,
use this option
WAN IP address:
Select this option when you have a fixed WAN IP
address This IP address is provided by your ISP.
Unnumbered:
Disabled by default.
