Alliance Laundry Systems SG025D, Оригинальное руководство пользователя

Страница: 25 / 64

Opening the Service Door
The service door must be opened to manually program the con-
trol.
NOTE: If the Break-In Alarm is enabled in programming,
it must be disabled before opening the top cover. For
more information on using the
Break-In Alarm , refer to
the instructions included with the external device.
After opening the service door, the operator has 4 minutes and 15
seconds to begin programming. If the correct passcode is not en-
tered in that time, the control will not accept operator program-
ming. Should this happen, open the service door again to trip the
switch and allows access to the programming options.
Stacked Tumble Dryer and Stacked
Washer-Extractor/Tumble Dryer
Open service door and disconnect bullet connector located be-
tween the "white/black" and "red/blue" wires for one second,
then reconnect.
Stand Alone Tumble Dryer
Unlock access panel over control and remove.
TMB1833R_SVG
1
1. Control
Figure 14
Opening the Service Door
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
25 Part No. 70600001ENR6