Alliance Laundry Systems SG025D, Оригинальное руководство пользователя

Страница: 22 / 64

of 2 minutes per second for the first 2 seconds. If the Rapid Ad-
vance Icon is still held in after that, the time will be reduced at a
rate of 10 minutes per second. The user may release the icon to
stop advancing through the cycle and the cycle will continue nor-
mally from that point on. They may press the icon again to ad-
vance further through the cycle as described. Time may be re-
duced all they way to the end of the cycle using the options de-
scribed.
Anti-Wrinkle Mode
The cycle will enter Anti-Wrinkle Mode two (2) minutes after the
cycle has ended. The display will show "Anti-Wrinkle". Upon en-
tering Anti-Wrinkle Mode, the control will increment the Total
Number of Extended Tumble Cycles audit counter. The control
will continue to show the End of Cycle Mode display. During the
Anti-Wrinkle portion, the control, if enabled will sound an audio
warning prior to turning on the motor for 30 seconds every two
(2) minutes.
The dryer will remain in this mode for up to 1 hour, or until the
door is opened, a key is pressed, a coin is entered, a vend pay-
ment is received (network or payment system), or a start pulse is
received. When the Anti-Wrinkle Mode timer expires the control
increments the Anti-Wrinkle Exceeded audit counter and enters
Extended Tumble Mode. If the door is opened, a key is pressed, a
coin is entered, a vend payment is received (network or payment
system), or a start pulse is received before Anti-Wrinkle Mode
expires, the control will enter Ready Mode, Partial Vend Mode or
Start Mode if a free Special Vend is active. Anti-Wrinkle Mode is
not included in the Total Operating Minutes counter.
Extended Tumble Mode
Extended Tumble Mode is entered after Anti-Wrinkle Mode has
finished. The display will show "Extended Tumble". During the
Extended Tumble, the control will turn on the motor for 2 mi-
nutes every 1 hour. If the extended tumble audio option is ena-
bled, the control will beep for five seconds and then stay solid for
five seconds prior to turning on the motor.
The control will remain in this mode for up to 18 hours, or until
the door is opened, a key is pressed, a coin is entered, a vend pay-
ment is received (network or payment system), or a start pulse is
received. When the Extended Tumble timer expires the control
will remain in Extended Tumble Mode. If the door is opened, a
key is pressed, a coin is entered, a vend payment is received (net-
work or payment system), or a start pulse is received before Ex-
tended Tumble Mode expires, the control will enter Ready Mode,
Partial Vend Mode or Start Mode. Extended Tumble Mode is not
included in the Total Operating Minutes counter.
Control Identification
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
22 Part No. 70600001ENR6