Alliance Laundry Systems SG025D, Оригинальное руководство пользователя

Страница: 21 / 64

Machine Error Mode
TMB1886R_SVG
Figure 9
The control enters this mode when an error is set. The control
displays the error and error information. The owner can enable
and disable certain errors and error displays as well as access to
clear errors in programming.
A notch appears in the header bar when a non-fatal error is set.
Internal Control Failure
If the control detects an error in its software or hardware, all out-
puts are turned off and the control displays the failure. If this con-
dition persists after an attempt to restart, then the control must be
replaced.
Shutdown Mode
CHM2051R_SVG
Figure 11
The shutdown option allows the owner to program the machine to
enter Shutdown Mode for a certain time and date range. The con-
trol displays "Unavailable" and ignores all screen touches and
vend additions. The
Language Selection Panel , Settings Menu
and Help Menu are accessible while in Shutdown Mode.
The control enters Shutdown Mode at the start date and time set
in programming and takes priority over other modes of operation.
The control remains in Shutdown Mode until the end date and
time set in programming.
The control cannot enter Shutdown Mode if running a cycle, in
Lockout Mode or if vend has been added. The control will enter
Shutdown Mode once those conditions are cleared.
Out of Order Mode
CHM2052R_SVG
Figure 12
The owner can activate and deactivate Out of Order Mode
through the
Settings Menu from the Approach Page and the Cycle
Preset Page .
The display shows "Out of Order" and "We apologize for the in-
convenience" to show the the machine is unavailable. The ma-
chine will accept coins, but the vend does not count toward a cy-
cle. The control does not allow cycles to run in this mode.
While in Out of Order Mode, the Settings Menu , Language Selec-
tion Panel and Help Menu are accessible.
Rapid Advance Mode
TMB1854R_SVG
Figure 13
While in Manual Rapid Advance during a running cycle, the re-
maining cycle time may be reduced by pressing the Rapid Ad-
vance Icon. Individual presses of the Rapid Advance Icon will re-
duce the cycle time by one minute. If the Rapid Advance Icon is
pressed and held in, the time remaining will be reduced at a rate
Control Identification
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
21 Part No. 70600001ENR6