20
MEM
3. Restoring Original Factory Settings
Advance to the ‘RE-INITIALIZE’ window function
(see Section A-2)
. The window will
display...
Certain functions can be restored to the original factory settings. They are:
The Piston Configuration re-initialization includes all the Configure Piston settings. The
MIDI Settings re-initialization includes all MIDI program change mapping. The Capture
Memory re-initialization will reset the last available capture memory to factory default
registrations
(if applicable)
.
Each of these functions can be restored individually. To select the factory settings you
wish to restore press the
CURSOR
button until the cursor is positioned on the parameter
value located on the 2
nd
line of the display. Press and hold the
MEMORY
button on the
Console Controller. Then, while holding
the
MEMORY
button, press General
Pistons 2-5-5 in sequence. The display
will briefly flash the word "WORKING"
on the first line of the display to indicate
that the current command function is being re-initialized.
4. Global
Tuning
Global Tuning allows the organist to adjust the pitch of the entire organ. This tuning
adjustment allows the organ to be tuned to another instrument more easily. Tuning can
be adjusted either ± 100 cents from A-440 pitch. To adjust Global Tuning, advance to
the ‘GLOBAL TUNING’ window function
(see Section A-2)
.
Press the
CURSOR
button until the flashing cursor is positioned on the current tuning
value. Turn the
ROTARY DIAL
in either direction to raise or lower the pitch of the
organ. The Global Tuning adjustment will be retained in memory when the organ is
powered off.
RE-INITIALIZE
Piston Config.
GLOBAL TUNE:
0
RE-INITIALIZE
Piston Config.
RE-INITIALIZE
MIDI Settings
RE-INITIALIZE
Capture Mem. XX
