9
IX. SAFETY
INFORMATION
USA ONLY
CAUTION
Never plug the instrument into any current source other than 110 to 120 volts, 50/60
Hertz alternating current (AC). A verified grounded outlet is essential to proper
operation and protection of the instrument. Proper polarity should be checked with an
AC circuit analyzer before connecting the organ.
Do not change the cable plug or remove the ground pin or connect with a two-pole
ground lift adapter.
If you are in doubt about your electrical connection, consult your local electrician or
power company.
In facilities where circuit breakers are turned off between uses (as for example, between
worship services), the circuit breaker affecting the organ console AC power should have
a guard installed to prevent it from accidentally being switched off.
It is important that you read and comply with all instructions and labels that might be
attached to the instrument.
INTERNATIONAL ONLY
CAUTION
Do not plug the instrument into any current source other than that stated by the selling
dealer. Proper polarity should be checked with an AC circuit analyzer before connecting
the organ.
Do not change the cable plug or remove the ground pin (if applicable).
If you are in doubt about your electrical connection, consult your local electrician or
power company.
In facilities where circuit breakers are turned off between uses (as for example, between
worship services), the circuit breaker affecting the organ console AC power should have
a guard installed to prevent its being accidentally switched off.
Read and comply with all instructions and labels that may be attached to the instrument.
