19
Press the
CURSOR
button until the cursor is positioned on “DISABLED” on the second
line. Turn the
ROTARY DIAL
clock-wise until “ENABLED” appears on the display.
This will activate Configure Piston mode.
At this point, pressing any piston will illuminate stops which are controlled by that
particular piston.
In this example, we will only program the MIDI stops. Select just the MIDI stops. Any
stops not turned on, will not be able to be registered on that particular piston. Press and
hold the
SET
piston. Then, while holding
SET
, press a General piston that you want
only the MIDI stops to respond on. Release both. The General piston just pressed will
now only be able to program the MIDI stops and will affect no other stops.
To return to the
Main Window
to store registrations to the pistons you just configured,
press and hold the
SET
piston. Then, while holding
SET
, press
CANCEL
. Release
both.
(See Section A-4).
To reconfigure a General Piston so it controls only the Swell Division stops:
Advance to the ‘CONFIGURE PISTONS’ window function
(see section A-2)
.
Press the
CURSOR
button until the cursor is positioned on “DISABLED” on the second
line. Turn the
ROTARY DIAL
clock-wise until “ENABLED” appears on the display.
This will activate Configure Piston mode. At this point, pressing any piston will
illuminate stops which are controlled by that particular piston.
Select
all
of the Swell division stops. Any stops not turned on, will not be able to be
registered on that particular piston. Press and hold the
SET
piston. Then, while holding
SET
, press a General piston that you want only the Swell division stops to respond on.
Release both. The General piston just pressed will now only be able to program the
Swell division stops and will affect no other stops.
To return to the
Main Window
to store registrations to the pistons you just configured,
press and hold the
SET
piston. Then, while holding
SET
, press
CANCEL
. Release
both.
(See Section A-4).
The use of the CONFIGURE PISTONS function is only limited by one’s creative
imagination.
Remember
: The above examples only determine which stops will become accessible by
the reconfigured pistons;
they will not change previously saved registrations.
_ CONFIGURE
PISTONS DISABLED
CONFIGURE
PISTONS ENABLED
CONFIGURE
PISTONS ENABLED
