15
MEM
7. Unlocking All Memories If You Forget Your Code
Advance to the 'UNLOCK ALL CAPTURE MEMORIES' window function
(see
section A-2).
Press and hold the
MEMORY
button on the Console Controller
, then press General
Pistons 2-5-5, in sequence. Release the
MEMORY
button. The display will
automatically return to the
Main
Window
function. All capture
memories are now unlocked, including
those memories other organists may have locked, however, registrations remain
unchanged.
8. Stop Action and Capture Self Check
This feature self-checks the capture system. The test insures each stop is functioning
properly and is controllable by the capture system. Advance to the ‘SELF CHECK’
window function
(see Section A-2)
.
To start the self-check, press the
CURSOR
button on the Console Controller to position
the flashing cursor on the word “OFF”. Turn the
ROTARY DIAL
to start the Self
Check function. The display will indicate that the Self Check function is now “ON”.
The stop indicators will turn on and off consecutively one at a time.
If any stop position
does not light, notify your Allen service technician.
During the testing process you can
interrupt and/or return to the
Main Window
function at any time by turning the
ROTARY
DIAL
until “OFF” appears in the display or by using the
SET
and
CANCEL
pistons to
return to the
Main Window
function
(see Section A-2).
UNLOCK ALL
CAPTURE MEMORIES
SELF CHECK
OFF
